Month: January 2018
Varnishing and polishing floors
The last finishing step is varnishing or polishing. These are treatments that conserve the floor and protect it against moisture and abrasion. In addition, these treatments give the floors an aesthetic appearance. Każdy rodzaj drewna powinien być zabezpieczony …
General rules for laying floors from planed boards and floor boards
Solid wood or glued plank floors are attached to the joists by nails. The joists should be perfectly level. Wymiary przekroju poprzecznego legarów …
General rules for laying a mosaic tile floor
Mosaic tiles are made of small-sized slats and butt-joined. The sets of slats in the board are glued to the paper with the face side, or the face side to the mesh. Stąd w zależności …
General rules for laying parquet
Concrete substrate, on which the parquet will be laid, it must be smooth, equal, clean and dry. The concrete finish coat cannot crumble or break. It is best to check the smoothness of the surface even, a wooden batten approx 2 m, przesuwając ją wzdłuż …
Wood floor cost planning and material specification
The decision to change the floor in an old apartment or the choice of a floor in a new apartment will always be determined by the tenant's financial and time possibilities as well as the availability of necessary materials on the market.
Koszt materiałów podłogowych z …
Finishing materials for floors - pastes, waxes and varnishes.
Materials for finishing wood floors can be divided into traditional and modern. The former include oil paints, pastes and waxes. Malowanie podłóg farbami olejnymi wyszło już prawie całkowicie z …
Materials for wood flooring
In residential buildings, wooden floors are most often laid out of coniferous floor sawn timber, from floor boards, made of floor slabs and floor slats (staves).
Floor lumber is made of coniferous species of wood, mainly pine trees, spruce and fir. …
Wall panels made of ready-made veneered boards
In retail sale, you can find veneered boards which, after cutting and making a groove for a foreign tongue, can be used for carpeting. In general, these boards do not have a symmetrical veneer pattern. They are best suited for carpets …
Veneer sanding – veneer
When sanding on a belt sander, it is not necessary to remove the paper adhesive tape first. However, using cylindrical grinders or a manual scraper and sandpaper - it is necessary.
Drawing. Time-consuming smoothing of the veneered surface with a scraper knife. Nóż w …
Cross-sections of veneered elements joints
The figure shows the cross-sections of veneered joints – veneered elements. A foreign tongue is most often plywood veneered with the same veneer as the facing side of the floor covering.
Drawing. Types of carpet joints made of veneered elements – provideowanych: a) foreign pen with a straight …